TECHNICAL SPECIFICATIONS

The cabin's walls are made of sandwich panels. The sandwich panels consist of 0.4 mm thick powder coated galvanized steel sheets both inside and outside which makes it secure from theft. They are insulated with 50 mm EPS (Expanded Polystyrene Insulation) technology, which makes the cabins to be used in all weather conditions. 

​

All the external and internal surfaces of our standard flat pack product range are made from RAL 9002 powder coated metal sheets which provides protection again rust and gives a smooth finishing. We may also offer RAL 7016 for customized orders. 

In order to take advantage of sunlight and offer a natural light inside our flat pack office cabins, we use 780mm x 1200 mm uPVC double glazed (4 mm x 12 mm x 4 mm) tilt & turn windows. The light transmittance is 82%, solar transmittance is 74% and U value is 5.7 W/m2K.

​

6m cabins have 2 windows whereas 3m and 4m units have 1 window. You always have the option to purchase extra windows with its supporting below/above wall panels. Fly screens can be arranged.

The frames of the door is made of 1.5 mm galvanized steel. The door is made of 1 mm thick coat coil galvanized steel sheet.

​

The dimensions of the door is 90 cm x 200 cm and and comes with metal door handle and cylinder lock. Similar to wall panels, we offer 50 mm EPS insulation in our doors.

The frame is made of 2 mm thick galvanised steel chassis profiles. 50mm EPS insulated panels are used for insulation on the roof section. 

On top of the panels, the outer roof layer is of 0.50 mm corrugated galvanised trapezoidal sheets to protect the cabin from weather conditions.

​

There are hidden gutters on both long and short sides of the roof section and rain water is drained via gutters through the corners, which are hidden inside the corner posts and wall panels which makes our cabins waterproof.

The frame of the chassis and the load bearing posts in our flat pack office cabin range is made of 2 - 2.5 mm thick galvanised steel profiles.

​

The chassis carcass is made of 1 - 2 mm thick C-U profiles which are fixed in every 40 cm along the cabins.

​

All the units in our standard flat pack product range has the frame colour of RAL 9002 (grey white). We may also offer RAL 7016 for customized orders. 

​

Our container cabins are transported as flat pack to offer a cost effective solution to our customers. We always try our best to pack the components as stable as possible in order to minimize the risk of damages and scratches. All the nuts, bolts, screws, corner trims, skirting, handles​ etc is supplied in the pack.

Thanks to their man-portable design, erecting our flat-pack cabins is easy and straightforward. You won’t need a crane or any heavy lifting equipment to assemble them. Depending on the size of the unit, all you need to have some spare hands to help you build your portable cabin.

The floor sections can be unbolted to reduce the weight, making it easier to carry into hard-to-reach areas like gardens.

The roof section is also designed to be lifted by hand without any special tools which makes it totally man portable.
 

The floor of our flat pack office cabins is made from 18mm OSB-3 boards over the carcass profiles attached to the frame.

Floor boards can be unbolted and carried to inaccessible places piece by piece where it makes our cabins totally man portable.

​

The boards are coated with wooden like 2.0 mm PVC vinyl, grey colour. 

​

The load bearing capacity of the floor is 250 kg/m2, evenly distributed. 

Our portable office cabin range has several dimension options: 

• 2.2m x 2.4m

• 3.0m x 2.4m

• 4.0m x 2.4m

• 6.0m x 2.4m. 

​

In addition to our standard range, we may offer custom sized units to meet your specific need. Please get in touch with our team.